iSeries Steel Iron Shafts
ACCRA is proud to expand upon its wildly successful i-Series shaft line with the addition of the first steel i-Series shaft.
As part of the True Temper Golf family, ACCRA as able to combine technologies found in other True Temper Golf golf brands, Dynamic Gold and Project X, to create a unique shaft sure to impress premium club fitters and their customers worldwide.
ACCRA i-Series steel has a unique Dual Step Design combining the “feel” of a stepped shaft in the handle with the stability and feedback of a stepless shaft from the mid-section down.
Available in three specific weights: 105g, 115g and 125g, i-Series steel is designed to enable club fitters to dial in performance with 10 dedicated lengths available in each model.
Visit your premium club fitter today see and feel the benefits of ACCRA i-Series Steel.
| Taper Tip | Flex | Mass | Balance Pt. | S3 Launch | Butt Ei/6 | Mid Ei/15 | Tip Ei/25 | Torque | Length | Tip OD |
|---|---|---|---|---|---|---|---|---|---|---|
| iSteel 6 iron 105 | Variable | 105.00 | 19.00 | 13.20 | 65.00 | 40.00 | 28.00 | 1.70 | 38.5 | 0.355 |
| iSteel 6 iron 115 | Variable | 115.00 | 19.00 | 13.10 | 72.00 | 45.50 | 32.00 | 1.60 | 38.5 | 0.355 |
| iSteel 6 iron 125 | Variable | 125.00 | 19.00 | 13.00 | 78.00 | 48.00 | 36.00 | 1.50 | 38.5 | 0.355 |
| Parallel Tip | Flex | Mass | Balance Pt. | S3 Launch | Butt Ei/6 | Mid Ei/15 | Tip Ei/25 | Torque | Length | Tip OD |
| iSteel 105 | Variable | 115.00 | 20.00 | 11.8 | 82.00 | 42.00 | 28.00 | 2.0 | 40.5 | 0.370 |
| iSteel 115 | Variable | 125.00 | 20.00 | 11.8 | 84.00 | 49.00 | 29.00 | 1.7 | 40.5 | 0.370 |
| iSteel 125 | Variable | 135.00 | 20.00 | 11.8 | 92.00 | 52.00 | 33.00 | 1.8 | 40.5 | 0.370 |
*All specifications are measured using the S3 Shaft Simulation System
*All frequencies (CPM) on the ACCRA website are measured with shafts at blank length using different chuck weights to corollate with the clubhead that each shaft would be used with.
- Irons - 265g chuck
- Sand Wedges - 292g chuck
- Hybrids - 230g chuck
- Driver and fairway shafts - 203g chuck