ACCRA driver shaft used to win the Boeing Classic

(PGMC/ACCRA – Kingston Ontario) ACCRA Premium Golf Shafts is proud that the 2014 Boeing Classic  Champion trusted an ACCRA shaft in his TaylorMade driver.
Going back to 1990, this University of Florida grad has ground out a career on the Web.com and PGA Tours, finding success has never come easily. With 2 previous Web.com Tour victories and some near misses on the PGA Tour, this win at the 2014 Boeing Classic is certainly a highlight of a long and under appreciated career.
Always known as a great ball striker, this playoff victory certainly displayed his ball striking prowess. In the Boeing Classic, he averaged almost 80% of fairways hit and just shy 300 yards off the tee.
This Champion trusted an ACCRA Tour Z ST65 M5 shafts custom fit into his TaylorMade driver.“The Tour Z line of shafts continues to win on all professional Tours, the combination of stability and feel provides a unique combination that is beneficial for all levels of golfers”  said Ron Graham, ACCRA PGA Tour Rep. “We have experienced great success with the Tour Z line of shafts on Tour, the feedback that we constantly receive revolves around the ability of this shaft to provide pop yet remain stable. This, when combined with the traditional ACCRA smooth feel, makes for a great combination.” continued Graham.

ACCRA premium graphite shafts are crafted using the highest modulus and most technologically advanced materials available. ACCRA has engineers to create the best products without any compromises. The recent success of ACCRA’s latest introduction gives remarkable credibility to the technologies utilized in all ACCRA shafts. These shafts are available through certified ACCRA fitters. Premium Golf management Corp (PGMC) owns all ACCRA trademarks. For more product information, or to locate a certified ACCRA fitter near you, please visit www.accragolf.com.
For more information on the entire ACCRATour Z line of shafts, please visit the ACCRA YouTube channel (https://www.youtube.com/watch?v=imcWy4a7WUo) and ACCRA website (www.accragolf.com), or contact a certified ACCRA fitter near you.

ACCRA driver shaft used to win the RBC Canadian Open

(PGMC/ACCRA – Kingston Ontario) ACCRA Premium Golf Shafts is proud that the 2014 RBC Canadian Open Champion trusted an ACCRA shaft in his Titleist driver.
The North Carolina State grad from Durban, South Africa won the prestigious event carding a 30 on the back nine of the final day. He led the entire field hitting 84% of the fairways for the week. This victory moved him into the top 25 in the FedEx Cup points standings and into this weeks WGC Bridgestone Classic. 

In 2013, he was custom fit by Cool Clubs in Scottsdale Arizona to an ACCRA Tour Z ST 55 M4 shaft in his Titleist driver and since that time, he has consistently been in the top 5 of driving accuracy on the PGA Tour. The 4th place finisher leads the PGA Tour in top 10 finishes, ranks 22nd on Tour in driving accuracy and was also professionally fit by Cool Clubs and uses a similar customized ACCRA Tour Z ST 55 M4 shaft in his Bridgestone driver, with different tipping. He also trusts an ACCRA Tour Z LS85 in his Ping G30 3 wood and a DyMatch 2.0 ST-H in his Ping hybrid.

“The Tour Z ST 55 continues to win on Tour, proving once again that ACCRA produces the most stable and consistent super lightweight shafts in the industry,” said Ron Graham, ACCRA PGA Tour Rep. “On tour we see players testing different lightweight shafts but usually return to traditionally weighted products. The ACCRA Tour Z ST 55 and recently added, ACCRA CS1 50, have changed players’ outlook on lightweight shafts. These shafts offer all the strength of a 65-70 gram shaft with the speed of 50-55 grams.” continued Graham.

All ACCRA shafts offer “Constant Flex Technology“. This enables a professional clubfitter to comfortably fit any golfer to any weight ACCRA shaft as once they have determined the optimal flex. The flex, stability and profile will not change from weight to weight within a model of ACCRA shafts.
 “ACCRA is dedicated to developing shafts for all levels of discerning golfers, and top ranked professional golfers are no different. Each of the three recent champions went through a fitting process similar to what any golfer would experience when visiting a certified ACCRA fitter,” said Gawain Robertson, ACCRA co-founder.  “All ACCRA shaft designs are developed with custom fitting in mind.  Our belief is that the only way to optimize a golfer’s potential is through professional custom fitting, and this is why ACCRA shafts are only available through being professionally fit by a network of certified ACCRA fitters on every continent,” continued Robertson.
ACCRA premium graphite shafts are crafted using the highest modulus and most technologically advanced materials available. ACCRA has engineers to create the best products without any compromises. The recent success of ACCRA’s latest introduction gives remarkable credibility to the technologies utilized in all ACCRA shafts. These shafts are available through certified ACCRA fitters.  Premium Golf management Corp (PGMC) owns all ACCRA trademarks. For more product information, or to locate a certified ACCRA fitter near you, please visit www.accragolf.com.
For more information on the entire ACCRATour Z line of shafts, please visit the ACCRA YouTube channel (https://www.youtube.com/watch?v=imcWy4a7WUo) and ACCRA website (www.accragolf.com), or contact a certified ACCRA fitter near you.
 

RBC Heritage champion and runner-up each trust ACCRA golf shafts

KINGSTON, Ontario (April 20, 2014) – ACCRA premium golf shafts is excited to congratulate the champion and runner up  of the 2014 RBC Heritage Championship.  Played on the famed Harbour Town Golf Links in Hilton Head South Carolina and featuring one of the years strongest fields. The champion, a Georgia Tech grad, holed a bunker shot on the 72nd hole to narrowly defeat the former world #1 ranked golfer in the world. ACCRA is proud that each of these amazing professionals have chosen to trust ACCRA golf shafts for quite some time, and many victories, now.
The Sea Island Georgia resident has moved to third in the 2014 FedEx Cup points race, 4th in official PGA Tour money list, 1st on Tour in Top Tens, and caps a streak of 4 consecutive top 5 finishes. This event featured 3 players in the top 10 custom fit with ACCRA high performance golf shafts.
This champion was custom fit to a Bridgestone 9.5 J Series driver with an ACCRA Tour Z ST55 premium shaft by Justin Nelson of Cool Clubs in Scottsdale, Arizona in early 2013, since then he has been on quite a ride that has included more than $7M of PGA Tour winnings and 4 PGA Tour wins.
“ACCRA is proud to be on the cutting edge of golf shaft design, our design philosophies and use of high modulus composite materials, continuously creates new standards in the industry” stated Gawain Robertson (Co-founder ACCRA). “The PGA Tour is the ultimate location to get instant feedback of new technologies, and success such as this certainly continues to add credibility and respect to the ACCRA brand.” continued Robertson.
ACCRA certified fitters are located in virtually every major golf center in North America, Europe, Asia, Africa and South America.  ACCRA premium golf shafts are exclusively available through the world’s best club fitters because it just does not make sense to buy off a rack.
“Now in our tenth year of existence, ACCRA is proud of what we have achieved in such a relatively short time. 56 PGA Tour victories, 30+ European Tour wins, but most importantly, ACCRA is considered the premium line of golf shafts designed exclusively for professional club fitters” commented Dave Makarucha (Co-founder of ACCRA).   “Each year ACCRA grows along with the world’s best professional club fitters and we have been huge proponents of club fitting since our inception in 2004 and to see the growth of this segment of the industry is even more gratifying than all the victories.”  
ACCRA shafts have always been designed to enable the world’s best club fitters to have multiple options.  This ensures that discerning golfers of all levels can be properly fit to maximize launch conditions for increase distance and accuracy. 
 ACCRA premium graphite shafts are crafted using the highest modulus and most technologically advanced materials available. ACCRA has engineers to create the best products without any compromises. The recent success of ACCRA ’s latest introduction gives remarkable credibility to the technologies utilized in all ACCRA shafts. These shafts are available through certified ACCRA fitters.   Premium Golf management Corp (PGMC) owns all ACCRA trademarks. For more product information, or to locate a certified ACCRA fitter near you, please visitwww.accragolf.com .   

New ACCRA iSeries Wood Shaft

ACCRA introduces iSeries Wood shafts at 2014 PGA Merchandise Show

(PGMC/ACCRA – Kingston Ontario) ACCRA introduces a new line of premium shafts to compliment the popular ACCRA iSeries iron shafts.

The iSeries wood shafts are built for speed, using a proprietary “iWeave” technology, the new iSeries (iWood) line features unprecedented strength in the butt section for maximum stability and resistance to “ovaling”.
The strength of the butt section effectively shortens the bendable section of the shaft creating a whip effect during the swing. This dramatically increases speed through impact.
The counter balance design also creates a draw bias tendency that benefit a large range of discerning golfers. This is enhanced by the responsive tip section, once again promoting speed through impact.

“The design features of this shaft clearly generates speed throughout the swing while maintaining the stability in a golfers hands” states Gawain Robertson (ACCRA Co-Founder). “During testing we were all astonished by the results for all levels of golfers as swing speeds increased with virtually all participants in prototype testing” continued Mr. Robertson.

ACCRA has begun shipping the iSeries wood shaft to certified ACCRA fitters worldwide this week, Fitters will have demo shafts in stock for golfers to test and “see the speed”.

“The ACCRA iSeries wood shaft is the perfect compliment to the extremely popular iSeries iron shaft line” stated Dave Makarucha (ACCRA Co-Founder). “The iSeries iron shaft line is the ultimate club fitters shaft as it enables the professional club fitter to fit using 6 different weights and more than 3 flexes per weight option. An ACCRA certified fitter can dial in an iSeries shaft to match any golfers swing.” continued Mr. Makarucha.

For more information on the entire ACCRA iSeries line of shafts, please visit the ACCRA YouTube channel (http://www.youtube.com/watch?v=Bt8P3dlKznE),  ACCRA website (www.accragolf.com), or contact a certified ACCRA fitter near you.

ACCRA premium graphite shafts are crafted using the highest modulus and most technologically advanced materials available. ACCRA has engineers to create the best products without any compromises. The recent success of ACCRA’s latest introduction gives remarkable credibility to the technologies utilized in all ACCRA shafts. These shafts are available through certified ACCRA fitters.  Premium Golf management Corp (PGMC) owns all ACCRA trademarks. For more product information, or to locate a certified ACCRA fitter near you, please visit www.accragolf.com.

ACCRA Unveils New Tour Z LT Series

KINGSTON, Ont. (March 28, 2012) – PGMC, the parent company to ACCRA Premium Golf Shafts, is proud to announce the introduction of an extension to its most popular premium shaft series ever. The ACCRA Tour Z band has certainly found a niche as a superior shaft brand for discerning golfers looking to reduce spin rates and launch angle, without sacrificing feel.The super high modulus materials enabled our engineers to create a constant taper design with the thinnest walls in the industry. This allows for maximum energy transfer and a smooth feel.The new ACCRA Tour Z LT (Low Torque) is designed with all the same features but utilizes some technology that is synonymous with the ACCRA brand from its early days (just a few years ago). The ACCRA Tour Z LT features a responsive tip section for increased club head speed and “kick”, yet maintains stability with super low torque.For those looking to increase initial launch conditions with low spin rates (awesome for fairway woods), the ACCRA Tour Z LT is for you.